Accelerometer
Optimal data quality with minimal noise & errors.
CentraTEQ offers an extensive selection of accelerometer mounting studs and sensor mounting accessories. With decades of experience in dynamics testing, we provide expert guidance to ensure optimal data quality with minimal noise and errors.
Correct accelerometer mounting is crucial for accurate vibration measurement. Incorrect mounting can lead to errors in data analysis, often unnoticed until it’s too late. These accessories are designed for precise and secure mounting, ensuring accurate data capture.
Accelerometer Mounting Studs & Accessories
KMISO-S1
The KMISO-S1 is an isolated mounting stud for use with accelerometers. The electrical isolation eliminates ground loop issues commonly caused when instrumentation within a measurement system is earthed differently. This is normally seen as a 50Hz (or 60Hz) high amplitude frequency spike in the data analysis.
The KMISO-S1 has a 10/32UNF thread on both sides of the isolated stud which includes a PTFE washer to ensure complete electrical isolation. The body of the stud is made from stainless steel and uses high strength high temperature epoxy to join the stud.
- Recommended mounting torque: 1.2Nm
- Electrically isolated
- Lightweight
- Stainless Steel
- -70°C to +200°C range
- 10/32UNF to 10/32UNF
- 13mm Across flats
KMISO-S2
The KMISO-S2 is an isolated mounting stud for use with accelerometers. The electrical isolation eliminates ground loop issues commonly caused when instrumentation within a measurement system is earthed differently. This is normally seen as a 50Hz (or 60Hz) high amplitude frequency spike in the data analysis.
The KMISO-S2 has a 10/32UNF thread for fitting to the accelerometer and an M5 thread for mounting of the isolated stud which includes a PTFE washer to ensure complete electrical isolation. The body of the stud is made from stainless steel and uses high strength high temperature epoxy to join the stud.
- Recommended mounting torque: 1.2Nm
- Electrically isolated
- Lightweight
- Stainless Steel
- -70°C to +200°C range
- 10/32UNF to M5
- 13mm Across flats
KMISO-ADH
The KMISO-ADH is an adhesive mounting base for use with accelerometers and other sensors requiring surface mounting. It features an aluminium body which has been hard anodised to provide electrical isolation from the mounting surface. This solution solves issues of earth loops causing interference in data signals from sensors.
The lightweight nature of the mount makes it ideal for use with miniature accelerometers. We can supply a range of adaptor studs for use with the KMISO-ADH making it flexible for use with a wide range of different manufacturer sensors.
- KMS-1028 – ¼-28UNF thread
- KMS-10M6 – M6 thread
- KMS-10M5 – M5 thread
- KMS-1010S – 10/32UNF thread
- KMS-1054 – 5-40UNC thread
KMS-ADH1
The KMS-ADH1 is an adhesive mount for use with accelerometers which feature a 10/32UNF tapped hole for mounting purposes.
The flat base can be screwed directly into the accelerometer and provides the perfect solution for adhesive mounting.
- Flat base for adhesive mounting
- Lightweight – 4.4gm
- Stainless steel
- -70°C to +200°C range
- 10/32UNF stud
- 14.27mm Across flats
KMS-ADH2
The KMS-ADH2 is an adhesive mount for use with smaller accelerometers which feature a 5-40UNC tapped hole for mounting purposes.
The flat base can be screwed directly into the accelerometer and provides the perfect solution for adhesive mounting.
- Flat base for adhesive mounting
- Lightweight – 1.9gm
- Stainless steel
- -70°C to +200°C range
- 5/40UNC stud
- 9.52mm Across flats thread